Posted on

ways to make hash

Ways to make hash

Hand rolling is a process that normally occurs as a consequence of handling large amounts of cannabis buds and trim while harvesting. Basically, trichomes will stick to your hands, eventually forming a noticeable black layer of sticky resin. Once a decent amount of the material has been gathered, you can rub your hands together to form small spheres of hash.

For those of you with a larger budget, there is an automated option that will save you both time and energy! It works similarly to the dry sifting method, but it’s all done by a machine. There will be a container where you’ll place your weed, which will be covered by a large silkscreen. The machine will shake this container, releasing all those delicious trichomes. To achieve the best results, freeze your cannabis three hours before you place it in.
Kief is what most of us know as that good stuff you get on the bottom of your grinder. Indeed, this is one of the several methods of extracting it. We’ll be getting into more serious methods of doing so below. But now, it’s important to establish how to make hash once your kief is collected. You’ll need a pollen press. The pressure from this device will transform the kief into perfectly compressed hash.

Now that you have your materials, put your cannabis trim/flower in a large bucket with the dry ice. Stir and shake this lightly for a few minutes. This will help the resin glands separate from the plant material. It’s the temperature that causes this. Using dry ice is primarily to keep your product from becoming too humid.
Wondering what to do with all that spare trim? Looking for an improved cannabis experience? You came to the right place! Here is how to turn kief into hash.
As you can see, there are numerous methods of extracting pollen. Each technique can vary from grower to grower, but they all involve separating trichomes/kief from plant matter and compressing into a solid substance. Even this list does not cover the full breadth of methods used today. So how do you decide which one to use?
Hashish results from the separation of trichomes from the cannabis plant. Although most trichomes are found on mature cannabis flowers, they can be sourced from all over the plant in smaller concentrations. This is the reason so many growers save their trim; they can extract all the trichomes holding the almighty cannabinoids and terpenes. These trichomes are then used to make edibles, or are pressed/heat-treated to form hash. Until recently, trichomes were referred to as simply “kief”. In fact, kief is technically the swollen crystal formation on the end of trichomes, which appear as microscopic, hair-like glands.
Once this is done, grab a glass jar and drain the mixture into it through the silkscreen. Let this sit for around half an hour. You’ll see the trichomes settle on the bottom of the jar. This is what you want. Try to empty about ⅔ of the water without losing any of the good stuff. Now, fill the jar again with ice water; let it settle for 3-5 minutes, then drain ⅔ of the water again. Repeat this process 4-5 times for top-quality hash.

Flat screening is also a relatively easy method, but you’ll be needing a silkscreen. The smaller the perforations are on it, the purer your hash will be. It’ll depend on whether you’re looking for quantity or quality.

Thankfully, hash, which can be created in a variety of ways, utilizes these wasted parts and concentrates them into a block of concentrated THC.

Ways to make hash

Releasing and warming cannabinoids exposes them to air. This has the beneficial effect of potentiating the THC through decarboxylation. Continued exposure to light, air, heat, and moisture leads to THC deterioration.

Side note You might also be interested in watching: WATER HASH 101: Plus 6 methods for DIY Water Hash
Pressing hash involves a combination of force and mild heat to condense the glands into a solid mass. The shape and size of hash varies depending on the pressing method. When hand pressed, hash is often ball-shaped. Flat-pressed hash may look like thin shale rock, with hardened shelf-like layers that chip along the creases. Mechanically pressed hash is usually a neat cake, like a bar of soap.

Further refinement using machinery and tighter control of temperature and humidity will yield the strongest nonsolvent concentrates.
Before attempting to compress kief or water hash the material must be completely dry. To ensure that all moisture has been eliminated before pressing, dry the material one last time. Place the kief or water hash in a food dehydrator set on the lowest setting, or a horticultural heat mat (preset at 74˚F [23˚C]), microwave the material on low, or place it in an open dish in a frost-free freezer. The vacuum conditions promote water evaporation, preventing mold from infecting and spoiling the hash. However, when the drying temperature is above 75˚F (24˚C), some of the terpenes will evaporate, diminishing the kief’s unique odors and their effects.
Water and ice can be used to mechanically separate trichomes from the plant, and filters can concentrate the glands into unpressed or “loose” hash.
Making hash is a wonderful method of preserving resin long after cannabis has been harvested. Whether in the kitchen or in the lab, hash making is a process that is available to everyone. Using old school methods or new school techniques, the process is relatively straightforward — agitate to remove trichomes, collect the resin, sort the resin by size, dry the resin, smoke and enjoy!
Pressing transforms the material both chemically and physically; the glands are warmed and most break, releasing the sticky oils that contain the psychoactive cannabinoids, as well as the terpenes—the source of cannabis’s smell, taste, and suite of effects.

Hashish oxidizes and darkens from exposure to light, oxygen, and heat. Regardless of its texture, high-quality hash should soften with the simple warmth of your hands.

Pressing hash involves a combination of force and mild heat to condense the glands into a solid mass.