Posted on

types of dab rigs

Glass – Borosilicate glass is strong stuff, and it works great in bongs and pipes. When used in nails for dab rigs, though, it misses the mark. Glass nails are pretty ubiquitous because they are very cheap. However, glass breaks easily. Glass nails don’t tend to last very long, and they must be replaced frequently. In the long run, you’ll end up paying more. Also, glass isn’t very good at retaining heat, so glass nails don’t always do the job with certain concentrates.

Using a torch to heat up the nail is inherently risky. If you are especially worried about it, consider investing in an e-nail instead. This entirely eliminates the need to use an open flame, so there is absolutely no risk of being burned.
So, are you an ideal candidate for a dab rig? If you’ve dabbed before and want to do it more in the future, you really need a rig. Sure, there are DIY instructions out there for making your own, but the amount of time and effort that will go into it really won’t be worth it in the long run. There are lots of cool designs and features out there, so buying a rig is a lot of fun.

Unless you are using an e-nail, light the torch and apply flame to the nail for the required length of time. Once it has been properly heated, use the dabber to apply the concentrate. It should produce vapor almost immediately, so have your mouth on the mouthpiece ready to inhale. Depending on the type of nail you’re using, it may take a while for your rig to cool down. If it’s a portable rig with a domed nail, though, you can safely close it up and carry it with you almost immediately. Otherwise, give it plenty of time to cool down first.
As people become more aware of the dangers of inhaling smoke of any kind into their lungs, they’ve set about looking for alternative ways to enjoy the medicinal benefits of various cannabis. Vaping is a prime example, but a phenomenon called dabbing is quickly picking up steam too. In fact, dabbing and vaping are closely related; dabbing more specifically refers to inhaling the vapor that’s produced by heating up cannabis concentrates.
Dabbing is easy once you’ve done it a few times. The exact way in which you do it may vary depending on the style of rig you are using. In its most basic form, however, it involves applying a small amount of concentrate — oil or wax — onto a nail, or heating element. Don’t be misled, though. Most nails don’t heat themselves up. With the exception of e-nails, which can do so, nails must be heated using torches. Dab rigs and torches are usually sold separately, but you can sometimes buy them as a set.
To clean your rig, you will just need rubbing alcohol, pipe cleaners, a bowl and paper towels or dry cloths. If you need more abrasive action, you can add a little salt to the alcohol.
Convenience – You’ll have everything you need to enjoy your favorite concentrate.

Before you get dabbing, make sure your torch has enough fuel. Nothing is more frustrating than going to heat up a nail and realizing your torch burner won’t work. Also, have your concentrate ready to go. In fact, apply the concentrate to the end of the dabber ahead of time.

A guide to dab rigs Dab rigs As people become more aware of the dangers of inhaling smoke of any kind into their lungs, they’ve set about looking for alternative ways to enjoy the medicinal

Types of dab rigs

Dabbing has become so integral to the cannabis market that it has its own holiday. July 10, or 710 (“Oil” turned upside down with LCD-style numbers), has become a popular “stoner’s holiday,” arguably in league with 4/20 . Most dispensaries have 7/10 sales on concentrates and other dab products. Where dabbing and dab rigs once made up little more than a fringe sector of the cannabis market, they are now a prominent part of contemporary cannabis culture.

A dab rig is the chamber of a glass pipe, connected to a nail or banger, used for dabbing, in the place of a traditional bowl typically found on a bong. New dabbers may be overwhelmed at the technique, upfront cost, and number of accessories required to use dab rigs and pipes. But they may also appreciate the strong, streamlined effects and heavy terpene flavors that concentrates and dab rigs provide.
To break up resistant residual oil, use rubbing alcohol to clean the components of your dab rig. Isopropyl alcohol, or rubbing alcohol, is a potent solvent that dissolves the difficult-to-remove oil that can collect in your nail or banger, or along the sides of the chamber. If wiping with an alcohol-soaked cotton swab won’t do the trick, soak your glass in alcohol to break up the oil particles before running a cotton swab or pipe cleaner along the surface. Be sure to completely rinse and dry your rig before use since alcohol is flammable.

There are a few essential cleaning steps that you can take to ensure you get the most flavorful dab experience time and time again.
E-rigs are similar to vape pens that are used to vaporize distillate, but they offer a more powerful platform for vaporizing all forms of concentrates. The first versions were stationary and had to be plugged into an electrical outlet, but current iterations are often battery-powered. These devices are somewhat of a cross between a dab rig for home use and a discreet, portable vape pen. E-rigs combine discretion with power and durability, making them ideal for concentrate fans who are trying to find a travel-ready alternative to a dab rig and torch.
The second iteration of the dab rig came in the form of a glass dome and nail — the first commercially available glass attachment that could turn any bong into a dab pipe. A glass artist known as WBM was one of the first to post about a glass nail for dabbing that fit inside the downstem of a bong, with a dome that was placed above it. Fellow glass artist and Toro Tubes founder JP Toro led the charge in making the dome and nail a commercially viable dabbing device. The nail was heated with a torch, then the dome was placed on top and a dabber, typically a paperclip in the days before proper dabbing tools, was used to put honey oil on the nail.
Be aware that most bongs or water pipes use a downstem situated at a 45-degree angle, which is very different from a dab rig’s usual 90-degree angle. As a result, your nail will also be sitting at an angle, so be sure that your melted concentrates don’t spill out of the nail while you’re taking the dab.
Exhale the dab vapor immediately after inhalation. Keep in mind that you don’t need to hold in your vapors before exhaling. Your lungs do an incredibly effective job soaking in all of the active terpenes and cannabinoids.

The main benefit of the e-rig is the ability to precisely control the temperature of your dabs. Unlike a traditional rig, in which you’re at the mercy of the flame and a timer, with an e-rig you can dial in the precise temperature you prefer and rest easy, knowing the nail will remain within a narrow range of your desired temperature.

A pipe designed for vaporizing cannabis concentrates, sometimes referred to as an oil rig, vapor rig, or concentrate pipe. Similarly to a bong, a dab rig filters concentrate vapor through water at the base. In addition to the central piece, dab rigs require a glass, quartz, ceramic or titanium nail, or banger to hold or “dab” concentrate, a dabber tool, and torch lighter for proper heating.