Posted on

how to make co2 for plants

How to make co2 for plants

Using exhale CO2 bags are the natural and easiest way of adding CO2 to your grow room. The Exhale CO2 bag cultivates carbon dioxide 24 hours a day with no need to refill bottles or use expensive production units.

If the CO2 levels drop below 200 PPM, your plants will stop growing.
If you are looking to accelerate the grow cycles of your crops consider adding additional CO2 to your grow room. Plant growth accelerates as you increase CO2 levels up to around 1,500 PPM. Growers have observed up to a 100% increase in grow speed at 1,500 PPM.

In addition to this, if levels of CO2 can be maintained around 1000-1200ppm then you will be able to run your grow room at a higher temperature. This can be incredibly important with growers constantly struggling to keep temperatures down and avoid temperature stress to your plants.
Indoor gardeners are always looking for new and innovative ways to boost their yields. There is, in fact, a very simple way to maximise your yields and grow strong and healthy plants, and this is through the addition of CO2 to your grow room. But what exactly is CO2 and how does it benefit your plants?
The power lies in the mycelial mass inside the vented cultivator. This mycelial mass cultivates carbon dioxide and the one-way breather patch releases CO2 continually for up to 6 months.
CO2, or carbon dioxide is what we expel when breathing, and what plants use to initiate photosynthetic functions. Plants actually ‘breathe in’ CO2 in the day, but give out CO2 at night.
It is understanding this behaviour that can really benefit your grow. If everything is being done correctly and you have a fine tuned system, then CO2 can be the one big difference in boosting your yields. Adding enhanced CO2 levels to your grow can significantly boost plant growth without having to change the way you grow.

Levels of CO2 are measured in PPM (parts per million), and ambient room levels are typically in the region of 300-400ppm. Assuming you have sufficient circulation in your grow room you should be able to achieve the atmospheric standard of 390 PPM. At this level, you should see plant growth similar to what you see in your garden.

When adding CO2 to your grow room, the flowering stage is the most important. Adding CO2 to your grow room, especially in the first 2-3 weeks of flowering, can kick start flower production and boost flower size significantly.

5. After a few hours, your mixture should start gently bubbling. This is the yeast doing its job producing carbon dioxide.

There you have it, now you know how to make your own basic yeast based carbon dioxide generator. You can keep the yeast colony going by pouring out some of the solution every week or so, and replacing it with fresh water and a few teaspoons of sugar. This will ensure that the yeast has a continual supply of food, and doesn’t poison itself as the alcohol concentration increases. If left without a fresh supply of water and sugar, the yeast will die within a week or two.
To overcome this, you will need to set up a system that slowly drips vinegar into a tray of baking soda. This way, all your ingredients don’t get used up at once, producing a steady stream of carbon dioxide.

6. Place the demijohn close you your plants.
You can also use a demijohn bung and piping to make the release of carbon dioxide more targeted. This bung (which has a hole in it for the piping), fits neatly into the top of your demijohn. You can then use piping to direct the carbon dioxide directly onto your plants. Bungs and piping can be bought anywhere that sells brewing equipment.
As long as you keep a constant supply of fresh air coming into your grow space, your cannabis will be fine. However, going the extra mile to boost carbon dioxide levels above the norm can really improve plant growth and the resulting yields.
4. Ensure that the temperature of the mixture is maintained. This should not be too much of a concern in a warm grow room.
Another way to produce carbon dioxide, without having to produce alcohol, is by combining vinegar and baking soda. However, as the reaction between baking soda and vinegar is very rapid, it doesn’t last very long.

All plants, including cannabis, need carbon dioxide to survive. It is used during photosynthesis – the process by which plants produce energy for themselves by converting water and carbon dioxide into sugar and oxygen.

How To Make a DIY CO2 Generator For The Grow Room All plants, including cannabis, need carbon dioxide to survive. It is used during photosynthesis – the process by which plants produce energy for