Growing marijuana starting from seeds can be a daunting task. Luckily we've put together the ultimate guide for growing weed from seeds! Knowing where your cannabis plants are in their life cycle will dictate when to prune, train, and harvest your plants. Learn more about marijuana growth stages today. Want to grow weed from seeds? Learn how weed seeds work, how to sex marijuana plants, and how to properly germinate your cannabis seeds.
Grow Weed Starting From Seed
“Don’t judge each day by the harvest you reap but by the seeds that you plant.”
Growing your own cannabis plant starting from seed is a remarkable journey. Understanding the biology of the plant is one thing, but comprehending how a little miracle bean can turn into a gigantic tree producing flowers that can affect your body and mind is nothing short of an evolutionary miracle. Or rather a co-evolutionary story of plant and human.
Start Growing Weed From Seed
Our favorite thing about growing your own weed starting from a seed , rather than a clone, is that you get to see the full life cycle and enjoy a plant that is unique, just like you. An entirely new genetic makeup will enter the world for the first time, and if you’re lucky, something remarkable might be born.
Raising a cannabis seedling , however, requires some patience, gentle hands, and a smidgen of luck. Thankfully pot seeds are remarkably vigorous because they are what’s called endosperm seeds , which means they have almost pre-formed cotyledon leaves before you even add water. Below is a brief guide on the techniques we have found yield the most success when starting seeds and raising your seedling to a healthy plant ready for transplanting. And, don’t forget, a Pot for Pot’s Complete Grow Kits take the guesswork out so you always wind up with a splendid harvest!
1) Germinating Your Cannabis Seed
To accelerate germination, soak your seed in a small container with lukewarm water and place it in a dark and warm place (like a kitchen cabinet) for 12-24 hours, but no longer. By drenching the seed, it absorbs the water thoroughly, activating the germination process on a physical and chemical level. Doing this helps to loosen the shell as it becomes a little softer making it easier for the embryo to crack it open. When your seed sinks to the bottom, it is ready to be planted, and sometimes the seed will pop out a small taproot. A seed can still be planted though if it does not sink or put out a taproot. When a seed pops a taproot (often called a tail), it becomes more vulnerable and it is better to plant it before this root emerges.
2) Planting Your Weed Seed
We see best results with seedling pellets that are made of a mix of compressed peat moss and coco husk. To expand, soak it in water for 10 to 15 minutes. Using warmer, lukewarm water, instead of cold water, will speed up the time the pellet takes to fully expand. Once your seedling pellet has absorbed enough water and has expanded to its maximum size, gently squeeze to remove excess water. The growing medium should be like a damp sponge that would not leave streaks on the table. Dig a small hole about 1/4 inch deep for your seed. Use a spoon to lift the seed out of its bath. If it has popped out a taproot be careful not to damage it. Gently place the seed into the hole and lightly cover it with dirt from the pellet. Now that you have started the germination process, your seedling will come above ground within two weeks. The older the seed, the longer it takes for it to germinate.
Want an easy-to-use starter kit for Cannabis seedlings? Check out our Seedling Starter Kit, perfect for nurturing your germinated seeds into viable, healthy plants.
3) Weed Seedling Sprouts
Perhaps the most exciting stage, your plant baby will come above ground in 1-2 weeks, with the average popping up in 5 to 7 days after planting. As your seedling comes above the soil, its shell might take a few days to fall off. It’s best to leave it alone, nature has the job covered. If it does not come above ground after about two weeks, the chance of success is dramatically reduced, and it’s best to try again. Even the best seeds have an 85% germination rate. When your seedling comes above ground, it is going to want to see a direct light source.
Save Money – No Tent Needed
Organic Cannabis Soil Recipe
Avoid Common Mistakes
4) Lighting for Your Cannabis Seedling
Marijuana seedlings require a medium amount of light — enough to get energy to grow, but not too much light that to get burned. Leaving your seedling in direct sunlight will cause the leaves to curl, while too little light will cause the seedling to stretch. If growing outside, seedlings want to see a direct light source to stop them stretching. If inside, a sunny windowsill with more than half a day of sunlight works wonders. Otherwise, 24 to 30 inches from a grow light is an excellent supplement. Your seedling should not stretch more than 6 inches at most.
5) Watering Your Cannabis Seedling
For cannabis plants young and old, it’s best to use bottled, distilled, or filtered water as these are without chlorine. If using tap water, let it sit for 48 to 96 hours before watering to dissipate any chlorine. Chlorine can also be eliminated by boiling for 20 minutes. Under normal conditions, after soaking your seedling pellet, it should contain all the moisture your plant needs before it comes above ground. As it grows, it will only need about a shot glass worth of water at most per week to keep the medium damp. Seedlings don’t drink a lot of water, which makes sense given their size. Your plant will do better in a growing medium which is damp but not soaking wet. Overwatering is just as deadly as drying out!
Damping off happens when the seedling is in too moist of an environment. The young plant’s immune system is not strong enough to ward off a fungus that results in the plant rotting from the bottom of the stem. When this happens, the plant will bend over and die if not treated. To help fight the infection, lightly spray a 0.5% solution of hydrogen peroxide around the affected area. However, the best option is to avoid this by not exposing your seedling to too much moisture.
6) First Cannabis Seedling Leaves & Hardening Off
The first set of leaves to come above ground are called the cotyledons . These little leaves are packed with energy and will grow to about 1/4 in in size before eventually falling off. Your second leaves to emerge will be single blades and will be serrated, looking like regular pot leaves.
They will become several inches in length. During their growth your first actual set of leaves will appear. These are typically three blades. Around this time is when your plant is “hardening off”. You will notice that the stem will start to develop a thicker skin and harden off. As the leaves of the plant get bigger, they can gradually handle more sunlight, so move it into more direct light– the more light the better!
7) Transplanting Cannabis Seedlings
About 10 days after germination, when the baby cannabis plant has hardened off, roots will start emerging from the bottom of your seedling pellet and the plant is ready to be transplanted into a bigger pot. Be very careful not to damage the roots during this stage. Any stress will slow its growth.
Dig a small hole in your bigger pot for the seedling, sprinkle some rooting booster in the bottom of the hole then carefully plant the whole seedling pellet holding your weed baby.
Now bury so the base of its stalk is level with the topsoil. Give it a watering to set the roots in the ground, then hold off watering until you pick up the pot and it feels light in weight.
Are you ready to transplant your seedlings? Shop our best selection of cannabis starter growing kits from small to large pots.
8. Separating the Girls from the Boys
At about 4-6 weeks into your plant’s growth , you’ll be able to determine the sex of the plant. You’ll want to separate and dispose of any male plants. This is an important step for growing marijuana because the female plants are more potent and valuable. You also don’t want male plants to compromise the growth of your female plants.
Why Do You Only Want Female Weed Plants?
Only female marijuana plants produce THC buds that are high in potency. You want to make sure your Cannabis plants are all female. If you have a male plant, it can fertilize the other female plants, and they will work to produce seeds instead of flowers and nugs.
It’s essential as a grower to know the difference between a female and a male plant so that you can remove the male plants before they contaminate your crop . Unfortunately, you have a 50/50 chance of getting a male plant when growing a plant from a seed from a nug.
There is a massive market for seeds that will only grow into female plants. But even these seeds are not a 100% guarantee you’re going to get a female plant. To ensure a good crop, you’ll want to germinate and plant many marijuana seeds and then separate the females from the males when the plants begin to show their sexuality.
How to Tell if a Weed Seed is Male or Female
As your plant matures sexually, it will develop between its nodes. Nodes are the area of the plant where the branches connect to the plant’s stalk. The distinguishing characteristics that will help you identify your plant’s gender:
- Male Plants : Small pollen sacs will cluster in the nodes.
- Female Plants : Stigmas will develop in the nodes. The stigmas can catch the pollen of male plants. Stigmas have hair-like veins that will extend from the sacs in the nodes.
- Hermaphrodite Plants : These plants have both the stigmas and pollen sacs in their nodes. These are female plants that develop both sex organs when exposed to a lot of stress.
Once you can identify the sex of your plants, you’ll want to remove the male or hermaphrodite plants because they can negatively affect the harvest of your female plants. That’s why it is crucial to germinate and grow several cannabis plants to this stage to ensure you get at least one healthy female plant.
9) Grow Weed Plant, Grow!
Suddenly, before your very eyes, the plant will transform. She will grow in height and branch out, putting off leaves and a network of branches. It is your job as the grower to meet her needs so that she can reach her full potential. With a good grow kit, this means as much light as possible and lightly watering only when she is thirsty.
This is considered your marijuana plant’s vegetive stage. The goal in this stage is to keep her healthy and allow the plant to grow as big and strong as possible so that she can hold many, many flowers.
Our complete grow kits include everything you need to go from seed to your very own supply of high grade medical cannabis.
4 stages of marijuana plant growth
Cannabis plants go through a series of stages as they grow and mature, and those different growth stages call for different amounts of light, nutrients, and water.
It’s important to know these stages and how long each lasts to know what the plant needs and when. Knowing where your cannabis plants are in their life cycles will dictate when to prune, train, and trellis your plants, and when to harvest.
How long does it take to grow a marijuana plant?
Generally speaking, it takes anywhere from 10-32 weeks, or about 3-8 months, to grow a weed plant from seed to harvest. It’ll be quicker if you start with a clone or an autoflower seed.
The biggest variability in how long a marijuana plant takes to grow will happen in the vegetative stage—after the seedling phase and before flowering.
If you’re growing indoors, you can force a weed plant to flower after only a few weeks when it’s small or after several weeks when it’s big.
When growing outdoors, you’re at the whim of the seasons and will have to wait until the sun starts to go down in the fall for plants to flower, and then to harvest.
However, one way outdoor growers can control the flowering cycle is by using light deprivation techniques.
What are a weed plant’s growth stages?
The growth stages of marijuana can be broken down into four primary stages from seed to harvest:
- Germination (3-10 days)
- Seedling (2-3 weeks)
- Vegetative (3-16 weeks)
- Flowering (8-11 weeks)
Cannabis seed germination
Seed germination length: 3-10 days
Marijuana light cycle: 18 hours a day indoors; full, direct sun 6 hours a day outdoors
The first marijuana plant stage begins with the seed. A cannabis seed should feel hard and dry, and be light- to dark-brown in color. An undeveloped seed is generally squishy and green or white in color and likely won’t germinate.
Once your seed has germinated, or sprouted, it’s ready to be placed in a growing medium, like soil. The tap root will drive down while the stem of the seedling will grow upward.
Two rounded cotyledon leaves will grow out from the stem as the plant unfolds from the protective casing of the seed. These initial leaves are responsible for taking in sunlight so the plant can grow healthy and stable.
As roots develop, the stalk will rise and you’ll begin to see the first iconic fan leaves grow, at which point your cannabis plant can be considered a seedling.
Can you speed up the germination process?
No. Cannabis seeds are delicate and don’t like to be moved around. They need a warm environment that doesn’t fluctuate in temperature, and not too much water. Once you put them in soil, we recommend leaving them be.
Quality seeds typically have high germination rates, but you may get some duds that don’t sprout. Let them do their thing; helping them along can decrease their change of survival.
Seedling stage in cannabis plants
Seedling stage length: 2-3 weeks
Marijuana light cycle: 18 hours a day indoors; full, direct sun 6 hours a day outdoors
When your marijuana plant becomes a seedling, you’ll notice it developing the traditional cannabis fan leaves. As a sprout, the seed will initially produce leaves with only one ridged blade.
Once new growth develops, the leaves will develop more blades, or “fingers” (3, 5, 7, etc.). A mature cannabis plant will have between 5 or 7 blades per leaf, but some plants may have more.
Cannabis plants are considered seedlings until they begin to develop leaves with the full number of blades on new fan leaves. A healthy seedling should be a vibrant green color.
Be careful to not overwater the plant in its seedling stage—its roots are so small, it doesn’t need much water to thrive.
At this stage, the plant is vulnerable to disease and mold. Keep its environment clean and monitor excess moisture. Be sure to give it plenty of light.
Even if growing outdoors, a lot of growers will start their seeds inside under an artificial light to help them through this delicate stage of marijuana growth.
If you buy a clone from a grower or breeder it will be a seedling, so you can skip the seed germination phase.
Vegetative stage in cannabis plants
Vegetative stage length: 3-16 weeks
Marijuana light cycle: 18 hours a day indoors; full, direct sun 6 hours a day outdoors
The vegetative stage of cannabis is where the plant’s growth truly takes off, and it typically lasts 3-16 weeks. At this point, you’ve transplanted your plant into a larger pot and the roots and foliage are developing rapidly. This is also the time to begin topping or training your plants.
Be mindful to increase your watering as the plant develops. When it’s young, your plant will need water close to the stalk, but as it grows the roots will also grow outward, so start watering further away from the stalk in the soil so roots can stretch out and absorb water more efficiently.
Vegetative plants appreciate healthy soil with nutrients. Feed them with a high level of nitrogen at this stage.
Cannabis plant flowering stage
Flowering stage length: 8-11 weeks
Marijuana light cycle: 12 hours a day indoors; full, direct sun 6 hours a day outdoors
The flowering stage is the final stage of growth for a cannabis plant. This is when plants start to develop resinous buds and your hard work will be realized. Most strains flower in 8-9 weeks, but some can take even longer, especially some sativas.
Outdoors, flowering occurs naturally when the plant receives less light each day as summer turns into fall.
Indoor growers can trigger the flowering cycle by reducing the amount of light marijuana plants receive from 18 to 12 hours a day.
There are three subphases of the flowering stage:
- Flower initiation (week 1-3): The plant will continue to grow and females will develop pre-flowers—pistils, or white hairs, will grow out, which are the beginnings of buds.
- Mid-flowering (week 4-5): The plant itself will stop growing and buds will start fattening up.
- Late flowering/ripening (week 6 and on): Trichome density will increase and plants will get very sticky; keep an eye on the color of the pistils to tell when to harvest.
There are a number of changes to consider once plants go from the vegetative stage to the flowering stage:
- Don’t prune when plants are flowering, as it can upset their hormones
- Plants should be trellised or scrogged so buds will be supported as they develop and air can flow through plants
- Consider giving plants bloom or phosphorus nutrients
What does the pre-flower stage look like?
Pre-flowers are the beginnings of cannabis plant sex organs. If you’re growing regular seeds, you’ll likely have a mix of male and female plants and will need to determine the sex of your plants to discard the males. It’s imperative to separate males so they don’t pollinate the females.
Pre-flowers appear at the nodes of the plant, where a branch grows out of the main stalk. Females will develop an oval-shaped bract with hairs or pistils sticking out, while males will develop round pollen sacs.
Learn more about pre-flowers and cannabis plant sexing in our anatomy article.
How to tell when a cannabis plant is ready to bloom
When growing outdoors, weed plants will start flowering, or blooming, after the summer solstice, when the daily amount of light starts to decrease. Plants will start developing pre-flowers, as mentioned above, telling you that flowering has initiated.
When growing indoors, growers make the decision to force blooming or “flip” plants into flower by cutting off the amount of artificial light they receive.
What to do when cannabis plants flower early or late
The amount of time it takes a plant to finish, or be done flowering and ready for harvest, will depend on what strain it is. Typically, indicas finish flowering early and sativas finish flowering late.
Note information from the breeder when you buy seeds to grow to get a sense of how long it takes to flower. You may have to harvest some plants early and some late depending on their finish times.
For late-flowering strains, keep an eye on the weather and make sure cold weather doesn’t ruin your plants before they finish.
When do buds grow the most?
Buds typically grow the most toward the end of the flowering life cycle. You probably won’t notice much budding out at the beginning of the flowering stage, and it will slow down toward the end of the cycle, when buds become fully formed.
Once buds have reached full maturation, it’s time to harvest your marijuana. How long it takes to harvest buds depends on many factors, including harvesting methods and how many plants you harvest.
How long can a marijuana plant live?
Weed plants are annuals, meaning they grow and live for one season and then die. Wild cannabis plants grow seeds and drop them when they die, which will grow into new plants the following year.
When harvesting, plants are cut down and die in order to get their buds. New seeds need to be planted in order to grow more plants.
If left unharvested, weed plants will eventually wither and rot within a few months after the peak flowering phase.
When should you grow marijuana?
If you’re growing outdoors in the Northern Hemisphere, growers usually get their seeds between February and April and start germinating seeds by the end of April.
Many start growing seedlings inside in a more controlled environment because seedlings are more delicate, and then put the seedlings in the ground outside once they’re a little bigger and the weather is warmer.
If you’re growing clones or autoflowers, you have a grace period of another month or so. Plants usually need to be outside, in the ground, by the end of June.
Harvesting happens sometime between September and November. This depends on your local climate, as well as the weather that particular year—one year it could be the end of September, the next, end of October; growers in the Pacific Northwest will have to pull down their crops earlier than those in Northern California because of cold weather.
If you’re growing weed indoors, you can grow whenever you like. Keep in mind that the outside environment will affect your grow space—you may need to add heaters in the winter or fans and ACs in the summer.
Other than that, you can start seeds whenever you like and flip them into flower whenever you like, depending on how big you want the plants.
Important dates for growing marijuana outdoors
Many growers begin germinating seeds as early as February and March in order to have big plants come harvest time, but the Spring Equinox is a good reminder that it’s time to kick off the outdoor growing process and start germinating your seeds if you haven’t already.
Many farmers wait until after Mother’s Day in May to put their plants outside. Just make sure all of your plants are outside by the Summer Solstice at the latest.
The weather will start to turn and the sun will begin descending in the sky as your plants fatten up with sweet, sticky buds. It might be tempting, but the Fall Equinox is about when to start harvesting. It’ll depends on your climate and the year—it could happen a little before or after.
Everything should be cleaned up, dried, and curing by Thanksgiving, and in some places, even by Halloween.
As winter approaches, it’s prime time to make your own cannabutter, topicals, or tinctures with all that trim from the harvest. Kick your feet up, relax, and hunker down for the cold, it’s been a long growing season!
Notes on marijuana growth phases
We can’t stress enough that the timeframes in the above graphic are ranges of time for the Northern Hemisphere. You’ll need to adjust them based on your specific region and local weather and climate.
Be sure to keep a grow journal to track the progress of your plants. Looking back on your notes will help you learn from mistakes and maximize the quality and quantity of your buds next year.
Take meticulous notes on when and how you perform each step, noting:
- How much water you give plants, and at what intervals
- Nutrient amounts
- When you top and prune
Pictures will also give you a better sense of how your plants look along the way.
Cannabis seeds 101: How to grow marijuana from seed
Cannabis is grown from one of two sources: a seed or a clone. Seeds carry genetic information from two parent plants and can express many different combinations of traits: some from the mother, some from the father, and some traits from both.
In commercial cannabis production, generally, growers will plant many seeds of one strain and choose the best plant. They will then take clones from that individual plant, which allows for consistent genetics for mass production.
If cannabis is legal in your state, you can buy seeds or clones from a local dispensary, or online through various seed banks.
Cannabis seeds vs. clones
For the typical homegrower, it may be easier to obtain cannabis seeds rather than clones. Growing from seed can produce a stronger plant with more solid genetics.
Plants grown from seed can be more hearty as young plants when compared to clones, mainly because seeds have a strong taproot. You can plant seeds directly into an outdoor garden in early spring, even in cool, wet climates.
If growing outside, some growers prefer to germinate seeds inside because they are delicate in the beginning stages of growth. Indoors, you can give weed seedlings supplemental light to help them along, and then transplant them outside when big enough.
Most seeds that you will buy are regular seeds as described above, but here are a couple more types.
How weed seeds work
Cannabis can be either male or female—also called “dioecious”—but only females produce the buds we all know and love. For reproduction, males have pollen sacs and pollinate females, causing female flowers to produce seeds.
Once cannabis seeds are mature, the female plant begins to die, and seeds are either dropped to the ground where they grow into new cannabis plants next spring, or the seeds are harvested for processing into seed oil or food products, or stored so they can be sown in the ground later and become the next generation of plants.
To get the buds found in medical and recreational stores, female cannabis plants are grown in an environment without males—or the males are removed from the area before they release pollen—so the females don’t create seeds. Females can then focus their energies on producing buds and not seeds—this high-potency marijuana is traditionally known as “sinsemilla,” meaning “seedless.”
Some varieties of cannabis can produce male parts alongside female flowers on the same plant, especially if exposed to environmental stressors. These plants are known as hermaphrodites, and sometimes they can self-pollinate to create seeds.
Pros and cons of using cannabis seeds
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
If buying from a reputable breeder or seed bank, growing from seed is the best way to ensure your plants will have solid genetics and start clean, meaning they won’t come with diseases or pests.
Also, buying from a reputable breeder or seed bank will give you a sense of what a particular strain will look and smell like, how it will grow, and how much it will yield at harvest.
The main drawback to growing from seed is there is no guarantee as to what you’ll end up with—if you buy a regular pack of cannabis seeds, it will be a mix of males and females. You’ll need to sex them out (more below) to identify the males and get rid of them, because you don’t want your females producing seeds.
Sexing marijuana plants can be a time-consuming process, and if you don’t catch males, there is a risk that even one males can pollinate your entire crop, causing all of your female weed plants to produce seeds.
One way to avoid sexing plants is to buy feminized seeds (more below), which ensures every seed you plant will be a bud-producing female.
You can also minimize headaches and avoid the hassle of seed germination and sexing plants by starting with clones.
How weed clones work
Aside from producing cannabis through seeds, or sexual reproduction, you can also reproduce the plant through cloning, or asexual reproduction. A clone is a cutting that is genetically identical to the plant it was taken from—that plant is known as the “mother.”
Pros and cons of using cannabis clones
Through cloning, you can create a new harvest with exact replicas of your favorite plant. Because genetics are identical, a clone will give you a plant with the same characteristics as the mother, such as flavor, cannabinoid profile, yield, grow time, etc. So if you come across a specific strain or phenotype you really like, you might want to clone it to reproduce more buds that have the same effects and characteristics.
With cloning, you don’t have to get new seeds every time you want to grow another plant—you just take a cutting of the old plant—and you don’t have to germinate seeds or sex them out and get rid of the males.
One drawback of clones is they need to be taken during the vegetative stage of a plant—flower is too late—so if you have a small setup with only one light, it can be hard to keep clones alive while flowering other plants, because the two need different amounts of light.
Another drawback to clones is they can take on negative traits from the mother plant as well. If the mother has a disease, attracts pests, or grows weak branches, its clones will probably have the same issues.
Additionally, every long-time grower will tell you that clones degrade over time.
What are feminized cannabis seeds?
Feminized cannabis seeds will produce only female plants for getting buds, so there is no need to remove males or worry about female plants getting pollinated. Feminized seeds are produced by causing the monoecious condition in a female cannabis plant—the resulting seeds are nearly identical to the self-pollinated female parent, as only one set of genes is present.
This is sometimes referred to as “cloning by seed” and will not produce any male plants. This is achieved through several methods:
- By spraying the plant with a solution of colloidal silver, a liquid containing tiny particles of silver
- Through a method known as rodelization, in which a female plant pushed past maturity can pollinate another female
- Spraying seeds with gibberellic acid, a hormone that triggers germination (this is much less common)
Most experienced or commercial growers will not use feminized seeds because they only contain one set of genes, and these should never be used for breeding purposes. However, a lot of beginning growers start with feminized seeds because they eliminate the worry of having to deal with male plants.
Top feminized cannabis strain families
A lot of classic weed strains that have been around for a while come in feminized form. Some popular fem seeds are:
- OG Kush
- GSC (Cookies)
What are autoflowering cannabis seeds?
Autoflowering seeds are also popular with beginning growers. They are easy to grow because you don’t have to worry about light cycles and how much light a plant receives.
Most cannabis plants begin flowering when the amount of light they receive on a daily basis reduces. Outdoors, this happens when the sun starts setting earlier in the day as the season turns from summer to autumn. Indoor growers can control when a plant flowers by reducing the daily amount of light plants receive from 18 hours to 12 hours.
However, a type of cannabis called Cannabis ruderalis, which developed in extreme northern conditions without much sunlight, will begin flowering once the plant reaches a certain age—they automatically start flowering regardless of the amount of light they receive, hence the name “autoflower.”
Pros and cons of growing autoflower
Because they grow and flower quicker, growers can fit in multiple autoflower cannabis harvests into the span of one regular harvest.
Autoflowers can be started in early spring and will flower during the longest days of summer, taking advantage of high quality light to get bigger yields. Or, if you get a late start in the growing season, you can start autoflowers in May or June and harvest in the fall.
Also, autoflower plants are small—perfect for closet grows or any small grow, or growing outdoors where you don’t want your neighbors to see what you’re up to.
A couple big drawbacks, though: Autoflower strains are known for being less potent. Also, because they are small in stature, they usually don’t produce big yields.
However, potency in autoflowering varieties has increased significantly since their initial introduction, with some breeders crossbreeding the low-THC ruderalis with other more potent varieties.
Tips for growing autoflower marijuana seeds
Autoflowering strains require some preparation, as they will grow quickly and start to flower whether or not you’re ready for them.
Many marijuana growers start autoflowers early in the season, and at a different time than a regular crop, so keep the season and climate in mind when growing and harvesting—your plants still need warmth to grow, and rain can give them bud rot. Consider growing in a greenhouse to protect them.
Because training happens during vegetative growth, for autoflowering plants, this period could be as short as a few weeks, which means time is limited. Try topping your autoflowers after they have three nodes, and stop once they begin to flower. You will want to prune them lightly.
Go easy on nutrients
Autoflowers don’t need lots of nutrients because they’re small and don’t spend much time in the vegetative cycle. They won’t need as much veg nutrients—such as nitrogen—but will need more bloom nutrients.
What are high-CBD cannabis seeds?
CBD, or cannabidiol, is one of the chemical components—known collectively as cannabinoids—found in the cannabis plant. Over the years, humans have selected plants for high-THC content, making cannabis with high levels of CBD rare. The genetic pathways through which THC is synthesized by the plant are different than those for CBD production.
Cannabis used for hemp production has been selected for other traits, including a low THC content, so as to comply with the 2018 Farm Bill. Consequently, many varieties of hemp produce significant quantities of CBD.
As interest in CBD as a medicine has grown, many breeders have crossed high-CBD hemp with cannabis. These strains have little or no THC, 1:1 ratios of THC and CBD, or some have a high-THC content along with significant amounts of CBD (3% or more).
Seeds for these varieties are now widely available online and through dispensaries. It should be noted, however, that any plant grown from these seeds is not guaranteed to produce high levels of CBD, as it takes many years to create a seed line that produces consistent results. A grower looking to produce cannabis with a certain THC to CBD ratio will need to grow from a tested and proven clone or seed.
How to germinate marijuana seeds
Germination is the process in which a seed sprouts and begins to grow into a new plant. Also referred to as “popping,” germination is the very first step in starting your weed grow.
Marijuana seeds can be acquired from an array of sources and can vary in quality. For more info on how to buy marijuana seeds, check out our Guide to buying cannabis seeds.
Cannabis seeds require three things to germinate: water, heat, and air. There are many methods to germinate seeds, but for the most common and simplest method, you will need:
- Two clean plates
- Four paper towels
- Distilled water
Take four sheets of paper towels and soak them with distilled water. The towels should be soaked but shouldn’t have excess water running off.
Take two of the paper towels and place them on a plate. Then, place the marijuana seeds at least an inch apart from each other and cover them with the remaining two water-soaked paper towels.
To create a dark, protected space, take another plate and flip it over to cover the seeds, like a dome.
Make sure the area the seeds are in is warm, somewhere between 70-85°F.
After completing these steps, it’s time to wait. Check the paper towels once a day to make sure they’re still saturated, and if they are losing moisture, apply more water to keep the seeds happy.
Some seeds germinate very rapidly while others can take a while, but generally, seeds should germinate in 3-10 days. If it’s been two weeks and a seed hasn’t sprouted, it’s probably a dud and won’t sprout.
A seed has germinated once the seed splits and a single sprout appears. The sprout is the taproot, which will become the main stem of the plant, and seeing it is a sign of successful germination.
It’s important to keep the delicate seed sterile, so don’t touch the seed or taproot as it begins to split.
Transplanting germinated cannabis seeds
Once you see the taproot, it’s time to transfer your germinated seed into its growing medium, such as soil.
- Fill a 4-inch or one-gallon pot with loose, airy potting soil
- Water the soil before you put the seed in; it should be wet but not drenched
- Poke a hole in the soil with a pen or pencil—the rule of thumb is: make the hole twice as deep as the seed is wide
- Using a pair of tweezers, gently place the seed in the hole with the taproot facing down
- Lightly cover it with soil
Keep a close eye on the temperature and moisture level of the soil to keep the seed happy. It’s very delicate at this stage. Use a spray bottle to water it—over-watering can suffocate and kill the delicate sprout.
Within a week or so you should see a seedling begin to grow from the soil.
Germinating cannabis seeds doesn’t always go as planned. Some seeds will be duds. Others will be slow and take longer to sprout. But some will pop quickly and grow rapidly.
This is the beauty of seeds—often, you can tell which plants or genetics will thrive right from the get-go. This will help you determine which plants you want to take cuttings from for clones or for breeding if you want to create a seed bank of your own.
How to sex a pot plant
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
As we’ve mentioned, cannabis is a dioecious plant, meaning male and female reproductive organs appear on different plants.
Because only female cannabis plants produce buds and you want them to focus all their energy on producing buds and not seeds, it’s important to identify and get rid of male weed plants so they don’t pollinate females. If females are pollinated, it will give you buds filled with seeds, making your weed harsh and unpleasant.
Cultivating males is important for breeders trying to cross new strains and genetics, but most people growing for buds will want to remove the males.
As mentioned above, you can skip the processing of sexing weed plants by growing with feminized seeds or clones.
If growing male and female cannabis seeds, they’ll start to show their sex organs, or “pre-flowers,” after 8-10 weeks from germination.
Cannabis plant sex organs appear on nodes, the points where branches grow off from the main stalk.
Males will have round balls—these will develop into pollen sacs, which will release pollen into the air when mature.
Females will have a round structure with long hairs—these hairs will develop into pistils, which will catch pollen in the air.
Pre-flowers can initially be extremely small and hard to identify with the naked eye, but you can use a magnifying glass to get a better look.
Can I grow a seed I found in a bag of weed?
Finding a cannabis seed in your stash is not ideal, but we’ve all been there before. Although much less common than it once was, it still happens. Sometimes you’ll notice one when grinding down some flower, or you’ll see one pop, spark, and crackle from the heat of a lit bowl.
These are referred to as “bagseeds” and whether or not you can grow one will depend on where it came from.
Is a bagseed good or bad?
Seeds found in finished cannabis buds can develop for a number of reasons. For example, a male plant may have accidentally pollinated a flowering female during the growing process. But more commonly, they’re a sign of stress and can be attributed to high temperatures during the final stages of flowering or an exaggerated spike in climate or environment.
Seeds can also form in plants with genetic disorders or instability, like hermaphrodites—plants that develop both male and female reproductive parts. Generally, stress and genetic disorders are viewed as bad, so temper expectations with any plant you start from a bagseed.
But sometimes you get lucky and find a mature seed in some really nice herb. Strains like the legendary Chemdog wouldn’t be possible without adventurous smokers planting and proliferating the seeds they found in a bag of kind bud.
So don’t discount bud because it has a seed or two in it. While not ideal, it could be the origins of the next great weed strain.
Ask yourself a few questions to decide if it’s worth the time and energy to grow the seed.
Was the seed found in good weed?
If you don’t like the flavor, effects, or even the look of the bud, then it’s probably not worth growing.
Are you ready to grow?
Growing marijuana takes a certain level of commitment: time, energy, and financial resources, so be sure you can commit to the whole process.
Is the seed viable?
For a seed to be viable, it must be mature enough to have a completely formed genetic blueprint, and it must be strong enough to germinate and pop through its hard casing and sprout its crucial taproot.
There are a few indicators that will give you a sense of whether the seed is worth germinating.
- Tiger stripes—dark stripes on the seed which resemble veins on a leaf are generally good
- Solid shell—a seed should be able to withstand a little pressure when pinched between your fingers; if it crumbles or cracks, it’s no good
Immature seeds tend to be light in color and have a soft outer shell.
In some cases, even if a seed isn’t completely mature, there’s still a chance it could be viable. But often these are extremely weak, take long to develop, and express other unfavorable characteristics. Growers usually discard weak plants to free up space.
You might also find a mature seed that has been physically damaged through poor handling, like rough trimming. In those cases, it probably isn’t worth the effort to try and germinate the seed.
But if the seed you found looks decent, you might as well germinate it and see what sprouts.
Time to germinate
Viable or not, there’s only one sure way to find out if a bagseed will grow. If you’re simply curious to learn and not as concerned with the overall outcome, you can plant a couple of bagseeds outside and see what happens.
If you’re ready for a more serious approach, make sure you have the space for a proper garden and pop the seeds to see what fruit they bear.
Even if your seed sprouts fast and grows vigorously, it still has roughly a 50/50 chance of being female and producing buds, instead of turning out to be a male.
Remember, once a seed germinates, the real work begins. Sexing, selecting, vegetative growth, flowering, and the eventual harvest all lie ahead.
How to buy cannabis seeds
Cannabis seeds can be found on numerous online seed banks, but note that it is illegal to bring seeds into the US and Customs will seize any cannabis seeds that they find in packages or on a person. In legal and medical states, you may purchase seeds at a dispensary.