Posted on

grow tent co2

Grow tent co2

CO2 should “fall” onto plants from above if possible. CO2 is heavier than air and will sink to the bottom of your grow area, so you you want your CO2 to float down onto your plants. That means any CO2 enrichment method should be located above your plants.

Now let’s learn how to use CO2 enrichment right because I’ve seen a lot of misinformation out there, causing many cannabis growers to waste a lot of money on ineffective CO2 methods. I want to help you set it up the right way and enjoy the benefits! After years of research and study by commercial greenhouse growers, we’ve learned exactly what’s needed to get the benefits of extra CO2.
5.) Compost

Not As Effective If You Don’t Have Bright Grow Lights – As far as light intensity is concerned, you probably need either MH/HPS or strong LED grow lights to produce bright enough light for your plant to be able to use the extra CO2. CFLs and T5s probably aren’t bright enough to get great results with CO2.
The cheaper methods of producing CO2 this way (such as a bunsen burner) use an open flame, which is a terrible fire hazard, especially considering you are keeping temperatures above 85°F (30°C) when flooding your grow area with extra CO2.
Can I keep humidity below 70% in vegetative and 60% in flowering in my sealed room while running CO2?
Does not raise temperature of grow room, in fact dry ice will slightly cool grow room
However, a lot of growers feel from personal experience that running CO2 does increase bud production. Some growers recommend that you keep running CO2 all the way until 2 weeks before harvest.

3.) Add CO2 By “Raining” It On Your Plants From Above

Will CO2 work for your space? How do you get set up? Learn everything you need to know about CO2 injection…

Grow tent co2

Levels of CO2 are measured in PPM (parts per million), and ambient room levels are typically in the region of 300-400ppm. Assuming you have sufficient circulation in your grow room you should be able to achieve the atmospheric standard of 390 PPM. At this level, you should see plant growth similar to what you see in your garden.

During the vegetative growing stage adding CO2 is the biggest way you can increase the rate your plants stretch, allowing your plant to grow with a lot more vegetative grow in a much shorter space of time.
They work through photosynthesis – photosynthesis is the process by which plant leafs make carbohydrates. Sunlight, carbon dioxide and water are converted into carbohydrates and oxygen by the action of chlorophyll in the chloroplasts of the plant. Plants growing indoors under artificial light often lack enough CO2 to efficiently photo-synthesise. When plants are able to maximise the process of photosynthesis, the result is larger plants with larger yields.

Using exhale CO2 bags are the natural and easiest way of adding CO2 to your grow room. The Exhale CO2 bag cultivates carbon dioxide 24 hours a day with no need to refill bottles or use expensive production units.
The most important and obvious benefit to your plants is the significant increase in growth that will occur, especially if the potential of your set up has already been maximised.
Indoor gardeners are always looking for new and innovative ways to boost their yields. There is, in fact, a very simple way to maximise your yields and grow strong and healthy plants, and this is through the addition of CO2 to your grow room. But what exactly is CO2 and how does it benefit your plants?
When adding CO2 to your grow room, the flowering stage is the most important. Adding CO2 to your grow room, especially in the first 2-3 weeks of flowering, can kick start flower production and boost flower size significantly.
In addition to this, if levels of CO2 can be maintained around 1000-1200ppm then you will be able to run your grow room at a higher temperature. This can be incredibly important with growers constantly struggling to keep temperatures down and avoid temperature stress to your plants.

If you are looking to accelerate the grow cycles of your crops consider adding additional CO2 to your grow room. Plant growth accelerates as you increase CO2 levels up to around 1,500 PPM. Growers have observed up to a 100% increase in grow speed at 1,500 PPM.

When adding CO2 to your grow room, the flowering stage is the most important. Adding CO2 to your grow room, especially in the first 2-3 weeks of flowering, can kick start flower production and boost flower size significantly.