Posted on

glass pipe cleaners

Glass pipe cleaners

Part of using a pipe, bong, dab rig — or virtually any other smoking device — is knowing how to clean it. With frequent use, and without regular cleaning, pipes will build up residue that leads to clogging and affects smoke flavor negatively. For an optimal smoking experience, it’s important to clean your pipe regularly. Below is a step-by-step guide to cleaning and maintaining a pipe for optimal performance, smoke purity, and longevity of use.

Carefully place the pipe in a sealable plastic bag and fill it with rubbing alcohol until the entire pipe is submerged. If you don’t have a baggie on hand, you can also use a small sealable container.
Now that you have what you need to adequately clean your pipe, follow the steps below:

Before you begin cleaning your pipe, gather the following ingredients and materials:
The pipe , a small, handheld device used to smoke cannabis, is one of the oldest and most common smoking methods in the world. Pipes remain popular cannabis smoking devices today, largely due to their availability, affordability, ease of use, and wide range of types, colors, and styles.
Add a teaspoon of table salt (sodium chloride) or Epsom salt (magnesium sulfate). Either will work. Salt will act as a scrubber or sponge on resin where an actual sponge or brush can’t reach. Work the salt into the pipe as much as possible to ensure it’s fully doing the work of deep cleaning.
Coarse sea salt is typically used to clean bongs and other water pipes, but table or Epsom salt is usually enough to clean a pipe. If your pipe is particularly dirty or filled with old, hard resin, try using coarse salt.
Leave the pipe to soak in the bag or container for about 12 hours. This will give the alcohol enough time to thoroughly dissolve the resin.

Give your pipe ample time to sit and dry before you use it again. If your pipe isn’t totally clean before you begin drying, repeat the previous steps and make sure to add new salt, as the salt from the first round of cleaning will have been largely dissolved.

How to Clean a Pipe Introduction The pipe , a small, handheld device used to smoke cannabis, is one of the oldest and most common smoking methods in the world. Pipes remain popular cannabis

Step 4: Add Salt

Step 6: Pour Out, Rinse & Repeat
Final Tips

Here are a few ideas:
You have your favorite glass piece, but inevitably, it develops resin and other nasty residue. Most people don’t like a dirty pipe or bong. Worse, a dirty glass piece just doesn’t work as well as when it’s perfectly clean. So here are three clutch methods to clean your glass pipe:
Fill your ziploc bag with rubbing alcohol, and then place your piece in ensuring it is totally submerged. The alcohol will break down all the resin and tar so that you can more easily remove stains.
Here’s what you’ll need…

  • Salt and vinegar
  • Baking soda and vinegar
  • Simple Green
  • Sand and water
  • 2-3 denture tablets

Seal the bag and shake the pipe in the bag until you’ve worked in the salt to all parts of your piece. Do this for a solid 90 seconds to two minutes (or until visibly clean). You can try putting your hands in the bag and using your fingers to close off the openings of the pipe, allowing you shake the mixture inside the chamber.

You have your favorite glass piece, but inevitably, it develops resin and other nasty residue. Most people don’t like a dirty pipe or bong. Worse, a dirty glass piece just doesn’t work as well as when it’s perfectly clean. So here are three clutch methods to clean your glass pipe: