Growing hydroponic feminized seeds can produce amazing results for cannabis growers. Hydroponics growing methods can produce super…read more Follow these steps to start weed seeds for hydroponics and get your plants off to a healthy start.
Growing Hydroponic Feminized Cannabis Seeds
Growing hydroponic feminized seeds can produce amazing results for cannabis growers. Hydroponics growing methods can produce super fast growth rates, high yields and super clean potent buds. Cannabis thrives in hydroponics, where roots have more access to oxygen, water and nutrients round the clock versus conventional growing methods. A lot of bud farmers greatly reduce veg times by growing in hydroponics; still harvesting very large budded plants for the same flowering times; hydroponics can hypercharge your crops.
Just like there are a lot of great female seed strains to choose from, there are a lot of different types of hydroponic growing methods and systems that you can use. Fact is some are better suited to growing feminized seed strains than others–that’s because female seed plants develop a solid tap root; something cloned plants never have.
Restricting the tap root of a female cannabis seed strain puts a lot of stress on the genetics–just like with conventional feminized seed growing tips HERE. It’s best to avoid putting hard stresses on ANY feminized seed plant, or growers may trigger undesirable traits, including pollination in severe instances.
What are the Best Hydroponic Systems for Growing Female Seeds?
Typically hydro set ups with more space for the root system is best–DWC (deep water culture), RDWC (recirculating deep water culture), large coco pots and similar are ideal. These types of systems have plenty of room for tap roots to stretch out and support large healthy root systems. They are also very productive and save on water and labor.
What are Hydroponic Systems to Avoid to Grow Female Cannabis Seeds?
Smaller sized grow blocks, like rockwool or small pots filled with grow rocks, etc will restrict root development, creating stress on feminized cannabis seed genetics. A 6 inch cube or pot should be considered the bare minimum, provided that plants will be flowered not long after seedlings are established. Larger is recommended.
What are Other Important Things to Avoid with Hydroponic Female Seed Plants?
Avoid wide drifts or big ups and downs with EC/TDS, pH and temperature in the root zone or nutrient solution. In bigger water culture set ups or hydro systems growers may use reservoir chillers during hotter times or may require submersible aquarium type heaters during cooler months. Try and keep roots at a steady 65 to 75 deg F. Wide or frequent swings can put a lot of stress on certain strains and cannabis varieties, with some being more root sensitive than others.
How to Start Weed Seeds for Hydroponics
Now that it’s legal to grow your own weed in dozens of states, many people are moving to hydroponics for their seed growth.
There are various benefits to this form of seed germination, but the process has to be done correctly in order to get your cannabis seedlings to form healthily. If you put the time and effort in at the beginning, you’ll create a hydroponic system that does most of the work for you later.
Creating Cannabis Plants From a Hydroponic System
Sure, it’s easier to buy an already germinated seed rather than taking the time to do it yourself.
But the costs add up quickly, whereas germinating cannabis seeds hydroponically yourself gives you a solid return on your investment.
Rather than buying sprouted seeds and adding them to your water system, you can have a successful germination rate. This process also takes away all the disadvantages of the seeds you get in the store.
Why You Need Hydroponics in Your Life if You Grow Cannabis
If you don’t want your cannabis seeds limited to what other people sell, growing seeds is the way to go.
Plus, you can avoid the concern of picking up diseases from store-bought marijuana seeds and spreading them to your young plants.
Once you get the hang of how to germinate cannabis seeds and tend to your hydroponic system, you’ll never want to grow seeds through any other growing medium.
Turning Quality Seeds Into Cannabis Plants
Because the root system in hydroponics never connects to the soil, any seeds sprouted stay safely floating until you’re ready to use your marijuana plants.
So, any sprouts emerging from your system stay healthy and untraumatized.
How do you take a few seeds to germinate, design a hydroponic system, and start growing marijuana yourself?
Here’s all you need to know about germinating cannabis seeds for the maximum yield possible.
Starting Your Hydroponic System
Ready to see how good it feels to watch your cannabis seeds germinate into a young plant?
Sprouting seeds is a simple way to increase your healthy plant yield. You end up with multiple cannabis plants rather than one healthy seed bought from a store.
To ensure you germinate seeds that can successfully grow into a cannabis plant, you need a hydroponic system.
It doesn’t have to be fancy, but the costs at the start will be more expensive than buying a sprouted seed.
Remember, though, that getting a few seeds over time will end up costing more than investing in and creating your own method of germinating seeds at home.
What Every Cannabis Seed System Needs
In a cannabis plant’s life, there are four main components.
As long as you learn these factors and use them in an organized manner, you won’t have to add too much more equipment or do a lot of work after the initial setup.
Germinated seeds in hydroponics don’t need soil growers like your average growing plants do when you use potting soil.
Instead, they just require the essentials: oxygen, water, a light source, and heat. As you start seeds in the system, the proper lighting and the right temperature are crucial.
A Simple Beginning that Anyone Can Do
Let’s begin the process of designing your first greenhouse hydroponic system starting small.
You’ll need a grow tray, some starter cubes, and a humidity dome to monitor the temperature and moisture levels.
Starter cubes aren’t necessary, but they do make a massive difference. They have the ideal nutrient solution, like peat pellets, to help those first seeds sprout.
Once the young seedling reaches the stage where it’s able to be transferred, you can easily move the planted cubes without disrupting the roots.
This helps prevent root rot from excess water and gives you the maximum yield possible.
Adjusting the Temperature
Within the dome, your grow tray helps your plants grow from feminized seeds into healthy cannabis plants ready for the flowering stage.
For your role, you have to monitor the temperature and humidity. If you see water dripping from the side of the starter cube or dome, there’s too much moisture.
A heating mat under the grow tray helps avoid cold temperatures messing with the starter cubes and the seedlings.
Because even warm water turns cold, this heating mat keeps the grow tray at the ideal temperature to nestle the seeds inside and encourage them to grow.
Finding the Right Light Source
When it comes to adding lighting in the room, you don’t necessarily need more light. You need something that the germinating seeds grow toward.
In the case of cannabis plants, many experts recommend a hydroponic LED grow light system.
Cannabis is a green plant, so it must have the ideal environment to encourage photosynthesis. Seeds sprout naturally when the lighting initiates this process.
Then, the plants capture the light and use it to change the water and the given nutrient solution into oxygen and the compounds you desire.
These little seedlings need intense light, which is found in an LED grow lighting system.
Enough light at the right intensity will ensure you get the maximum yield possible from younger and older seeds.
Sprouting Your Seeds
Now that your environment is set up, it’s time to start the process of germination!
First, take your starter cubes and let them soak in clean tap water. In an hour or so, take two or three seeds and add them to the cube.
You should use enough to ensure at least one germinates, but not so many that if they all do, they’ll be overcrowded. As they begin to grow, any plants that look like they aren’t as healthy as the others can be thinned out.
Move the Starter Cubes
Next, take your grow tray and add an inch of half-strength nutrient solution.
Place the lighting source and mat where they fit best, then add the dome to keep the temperature and moisture at optimal levels.
Add your starter cubes into the tray, add a little water (not too much, you want to avoid root rot), and that’s it!
It will take a few days for seeds to germinate, but you’ll see whether your system is working or not by the fourth day.
Get Ready to Transport!
The seeds are germinating, and you can see roots daintily hanging out of the cube’s bottom. It’s the moment you’ve anticipated since you started your basic hydroponic system.
It’s time to transplant your young plant!
Chances are, it’s only been a month or less, but it can feel like forever as you’re checking and double-checking the plant’s health.
Now, it’s the real thing, and you’re moving your seedling into your actual hydroponic area.
This is the bigger tank or pond where you’re going to hold your nutrient solution and let your plants thrive until you’re ready to cultivate them.
Gently Move the Cube
Once you have a place for the cube, use the paper towel method to hold under the roots as you gently pull it from its grow tray.
There isn’t anything that connects the roots to a soil system, so a wet paper towel is all you need.
The roots are going to need a little time to get used to their new environment.
While they try to absorb the system’s nutrients, you can add a little water to the top or use those wet paper towels to cover the cube.
As the paper towel dries out, you know it’s time to add a little more moisture. Within a day or two, your new seedlings should be enjoying their hydro system without help, and you can drop the paper towels.
Enjoy Your Hard Work
You’ve taken your cannabis from small, non-germinated seeds to a young, healthy, green plant. From there, you guided it and monitored its growth as it flowered.
Now, it’s time to cultivate the good parts and turn the leftover cuttings into more cannabis seeds.
The return on your investment starts now. Rather than heading back to the store to find more cannabis seeds to germinate, you have everything you need to repeat the process.
Your grow tray is ready to house some more starter cubes. Your light source is still intensely shooting out waves of photosynthesis-inducing light, and your humidity dome is set at the ideal temperature and moisture.
Go ahead and take those new seedlings from the plant you nurtured and turn them into new young plants. You’ll never have to buy your cannabis stash again!
If you enjoyed this article, Click the link below and share it with your friends!